How do you store a pool cover when not in use?

Most safety covers are mesh and can be folded and put in the mesh storage bag while they are still wet. Once it is completely dry, it can be stored. However, if you store the cover in a plastic container, make sure it's dry before storing it, to avoid mold. Store the cover in an elevated place if possible.

After drying the cover, it is ready for storage. The best option is to fold the cover as if you were folding a large canvas. Fold it in half over and over again until it has a size you can store. Some covers are shipped with a protective mesh or vinyl bag with a zipper.

Insert the folded cover into the bag and close the zipper. You can then hang it in a garage or shed. Try to avoid storing the bag directly on the floor, where moisture could penetrate the bag's material. Zippered covers can be made of vinyl material.

They are designed to be attached to the protective track above the track that supports the liner. You should keep these covers damp to prevent shrinkage. Before removing them, use brushes to clean the locking covers. You can fold and roll them up like a sleeping bag for storage.

Use a sealed container with algaecide and water to store them. The algaecide prevents the water from turning rancid and keeps the cover secure after opening the pool. Follow these simple and effective methods to store pool covers after opening it for the next swimming season. It is also strong enough to hang the floor cover according to the recommendations of most safety cover manufacturers.

The correct procedure for storing a safety cover is to fold and roll it up like a sleeping bag, and then store the cover in the mesh bag it comes in. If you have anything smaller than a 20 x 40 foot pool, your deck should fit easily in one of these containers. This container shape also works best for people who aren't good at rolling up the lid properly, making it difficult for them to fit in shorter 44-gallon containers. The last thing you want is to wrinkle the cover of a corner of the patio all summer and forget about it, only to discover that it's dirty, moldy and generally disgusting when it's time to put it back on the pool.

A vinyl cover in the pool should be cleaned with brushes before removing, folding and rolling it up as if it were a sleeping bag. Modern canvas covers are almost as thick as a plastic garbage bag and will get punctured if you simply look at them the wrong way. When you open the deck in the fall to close the pool year-round, you'll discover that your pool deck now has dozens of holes because these creatures bite through the folded layers. While you can reduce the problem with holes, the purpose of a canvas cover is to isolate pool water from water or debris from the top.

All-Safe Pool Fence & Covers recommends folding the cover back on itself in the shape of an accordion to keep dirt inside the cover and out of the water during extraction. Vinyl covers should be stored wet every year to avoid the shrinkage problems that can occur when allowed to dry. If the pool cover includes anchors and springs to keep it in place with tension, always remove them so they don't get in the way before removing the cover. The algaecide is used to prevent the water inside the container with lid from turning rancid during the summer months when it is stored.

Pool stores sell similar products for a little more money, but for most pool covers, this bin will be perfect.

Ben Young
Ben Young

Ben loves pool covers